Categories
Stop Tech Big front kit
Product info |
| StopTech Big Brake Kit: StopTech Big Brake Kits give your vehicle that Supercar look and feel, and exceed stock performance in two areas. First, larger rotors increase heat capacity. Second, stiffer calipers and stainless steel lines reduce system compliance.
The key, however, is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front torque (as many do), you reduce your car's ability to utilize the tractive capacity of all of the tires to the maximum practical extent (even on ABS equipped cars) and you therefore create performance sacrifices. In addition, too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, which limits a driver's control of brake input on the race track. Advantages of StopTech over other brake upgrades: * Shorter Stopping Distances * Better Brake Modulation * Firmer Brake Pedal * Less Brake Fade Feature Benefit Summary: * Balanced Brake Upgrades with optimum brake bias offer the shortest stopping distance with the best pedal feel * StopTech patented AeroRotors with the best airflow available result in better cooling, less fade and longer rotor and pad life * The stiffest aftermarket calipers with patented bridge result in better clamping under hard braking and less pad taper * Track testing of new applications ensures optimum performance ST-22 - 2 PISTON CALIPER FOR REAR KITS * Made of billet aluminum * All finished parts are 100% tested to a pressure of 2500 PSI * Uses standard FMSI D961 Pad (VIEW PAD SHAPE) * 2 piston opposed design * May be added to cars with existing front StopTech kits * Piston size adjusted for the application, just like our front calipers * Dust boots are standard * Weight: 4.4 lb (2 kg) unloaded ST-10 - 1 PISTON CALIPER PARKING BRAKE FOR REAR KITS * Made of billet aluminum * Different levers to fit your stock parking brake cable * Fits any rotor 28 through 32mm wide * Single piston slider design * Uses standard FMSI D377 Pad (VIEW PAD SHAPE) * Weight: 4.13 lb (1.9 kg) unloaded |
|
|
| STG I BUILT 2.5l STI Race Block | Cusco LSD |
|
$2435.00
|
$1260.00
|
|
|
| STI 99.5 mm STD bore pistons | GTSPEC SS Equal Length Exhaust Manifold & Uppipe w/ External Wastegate Flange |
|
$100.00
|
$809.10
|
|
|
| Tein STech Springs | |
|
$232.00
|
|
My Cart
Bestsellers
Authentication
